How to Clean your Gun: A Step-By-Step Guide

Want to know how to keep your gun dry and safe? If you also want to know how to keep your rifle accurate and how to fire it properly? So, in case of an emergency, on a hunting trip or just going out for practice, every gun needs a good cleaning to work the way it needs to.

Each time your gun is fired, carbon and copper residues accumulate in your bore. The bore snake is a quick way to clean up the remains. For deep cleaning after a hunting trip or after a range session, you can use a brush and patch with a cleaner to get your gun back to its original position.

In this article, we have guided you through the basics of cleaning your handgun so that you can keep your gun in good condition.

Additional Read: Essential Gun Cleaning Supplies for Your Kit

How to Clean Your Gun in the Field

Field cleaning is the basic cleaning to remove debris from your rifle while you are in the field. If you’re not in a place where you can set up all the supplies like your gun and cleaning rod and take the time to clean your gun well, then you need your bore snake to field clean.

If it is raining and your bore is stagnant, if you are in bad weather or in harsh, dusty, and dirty weather, this is the first and great way to get your rifle back in shape from the breech to muzzle.

  1. Take your rifle, make sure it’s unloaded, and remove the bolt.
  2. Place the weighted tip of the oiled bore snake under the barrel and pull the muzzle out of the bore.
  3. Do this 2-3 times and you are good to go.

Gun Cleaning Tip:

  • Before you go on your trip, place your bore snake on your bench and wet the first 1/3 of the bore with a bore cleaner like Hoppe’s.
  • Then roll up and place in a ziplock bag.
  • Now, when you are in the field to clean the field, you take out your Ziploc bag, take out your bore snake and pull it out of your rifle and clean the remains.
  • The brass pieces from the Boer snake will help you rub your gun better.

When you get home from your trip, you’ll want to clean your gun well. This way, quick and easy field cleaning will help you get the most out of carbon. It can also be lubricated and water-resistant. But it won’t pull out heavy copper deposits or carbon deposits like good deep-home cleaning.

So we’re also going to show you how to do a good cleaning of a long gun. You can follow the same steps on a shotgun or a pistol.

How to Clean Your Gun at Home

We should make reference to that your initial step should be to peruse your proprietor’s manual. This will assist you with seeing precisely how to dismantle your weapon and clean it. Get to know your gun and how to deal with it.

Alright, when you return home from the field or the reach, put away a half-hour to give your gun the TLC it merits.
You’ll require your weapon, a gun vise, a cleaning rod with a brush and a jag connection, cleaning arrangement, lubricant, flannel patches, and a shop material.

  1. Make sure your gun is unloaded and then remove the bolt. Reset your gun vise.
  2. Take your bore brush and screw it onto your cleaning rod. Dip your brush into your solvent.
  3. Push the brush and rod from the bore to the end. Do about 20-25 strokes back and forth, then pull it out and set your cleaning rod aside.
  4. Let set for about 5-10 minutes for chemical reaction. Let the bore cleaner work on copper smelting and carbon storage.
  5. Take your patch jag and screw it onto your cleaning rod. Take a flannel patch and pull one corner along half of the jaggery and fold it at the end.
  6. Then, take the patch and run down to clean the dirt in the bore.
  7. Repeat brushing with solvent as needed.
  8. Keep fresh patches down from the bore until they come out clean. Now it’s time to lubricate the bore.
  9. Put 8-10 drops of oil on a patch and run it under your bore.
  10. It is a preservative so that moisture and moisture will not get there and the bore will not rust.
  11. Take a dry patch and run it under the bore to remove any excess grease or cleaning oil contained in the bore.
  12. Take one of your patches that had a cleaner on it and clean your bolts. Then lightly oil the bolt.
  13. When you are done, take a good clean shop rag and wipe your gun so that it is clean and dry. Removes any oil, dust, and dirt.
  14. Put the bolt back into the rifle.

That’s it..! You’re all done!

Read More: Ultrasonic Gun Cleaner Dos and Don’ts

How Often Should You Clean Your Gun?

You know your firearm best. So we suggest you, do a decent cleaning appreciate that all other times you shoot. You should run a bore snake through it after each shooting meeting.

In the event that your objective is outrageous exactness, you’ll need to clean after each shooting session. Your rifle can fire through a specific measure of fouling without an issue, yet after somewhere in the range of 30-100 rounds, you have fouled in there that will influence your precision. In case you’re out searching for an elk across a ravine or truly expecting to hit an objective, you’ll need your barrel clean.

In case you’re a waterfowl tracker, you’re out in brutal conditions like a downpour, cold, hail, snow, mud, and your shotguns truly get destroyed. Clean your shotgun completely after each utilization; trying to oil it well to keep it water-safe.

In the event that you have a handgun for home safeguard, regardless of whether you shoot it during the year, the additive oils can vanish over the long haul. So while you don’t have to clean it, since you haven’t discharged it, you would like to re-oil your home guard gun one time per year, regardless of whether it’s a rifle, gun, or shotgun.

Leave a Reply

Your email address will not be published. Required fields are marked *