Ultrasonic Gun Cleaner Dos and Don’ts

Operators of law enforcement agencies, military and security personnel, hunting and recreational shooting clubs, gun collectors, and gun shop service departments rely on ultrasonic gun cleaner systems for quick, thorough gun cleaning and lubrication. This post explains that regularly scheduled use of an ultrasonic gun cleaner system is the best way to keep your gun investment in top condition.

We will start with the basics, followed by instructions on what to do and what not to do with ultrasonic gun cleaning.

How an Ultrasonic Gun Cleaner Works

First of all, we recognize that gun owners are well aware of the importance of using brushes, sprays, pads, and lubricants to clean their equipment after each use. But these manual methods do not allow contaminants to enter cracks, pits, blind holes, and other restricted surfaces that, if left unchecked, could interfere with the reliable operation or reduce the value of guns.

Regularly scheduled sessions in the ultrasonic gun cleaners will remove potentially harmful contaminants and residues missed by manual maintenance methods. The secret to the best gun cleaning is called ultrasonic cavitation. This is due to the immersion of billions of minutes of bubbles in a biodegradable ultrasonic cleaning solution as they come in contact with all components of the gun immersed in the solution.

The bubbles are created by an ultrasonic transducer attached to the bottom of the ultrasonic gun cleaning tank. Typically run at frequencies like 37 or 45 kHz. Bursting bubbles loosen quickly and safely and remove grease, powder residue, shavings, and other contaminants that can interfere with reliable gun operation.

There are so many small bubbles that they penetrate into the cracks of the minute, into the valley, and into blind holes that are impossible to reach with a traditional rifle and pistol cleaning tools, solvents, and aerosols. The ultrasonic weapons cleaner will complete the job in approximately 10-15 minutes. If several guns are being cleaned at the same time, the cycle can be longer.

Now, Do’s and Don’ts.

DO – Field-Strip the Weapon

Most people with experience handling weapons understand that field-stripping and disassembling is part of the manual cleaning task.

Similar remains constant for ultrasonic firearm cleaners. The ultrasonic cleaner works at its best on these more modest parts, where the minuscule air pockets enter into the difficult to-arrive at openings, breaks, and fissure that hand-cleaning techniques miss.

As proposed over, the ultrasonic cleaner can eliminate a large part of the impurities from these spaces in a negligible portion of the time and the interaction doesn’t harm metal surfaces.

DON’T – Clean Wood or Ivory Parts in an Ultrasonic Gun Cleaner

Intense cavitation activity is exceptionally compelling at cleaning metal surfaces, yet it tends to be a lot for some non-metal parts. Parts made of wood or ivory can wrap, break, or be generally harmed by temperatures and disturbance found inside an ultrasonic cleaning shower.

Different techniques ought to be utilized to clean these parts independently from the weapon’s center parts.

DO – Maintain the Weapon After Cleaning

After ultrasonic cleaning, customers should flush, dry, and grease the parts of the gun. The support assignment should be done shortly after the cleaning process is complete, as the gloss and toxins that are noticeable around the surface can be a big part of the effort to keep the gun perfect and rust-free. To achieve this we suggest the ultrasonic greasing-up shower pictured below.

DON’T – Use Flammable Solvents

Flammable solvents spell danger both from a utilization and disposal standpoint. Ultrasonic cleaning formulas intended for cleaning guns are water-based and biodegradable. If “water-based” makes you stop, appropriately regulated ultrasonic cleaning and greasing upcycle dispense with rusting concerns.

DO – Follow Ultrasonic Gun Cleaning and Lubricating Procedures

Cleaning solutions and lubrication formulations designed for ultrasonic gun cleaners help speed up the process and protect your guns.

An excellent cleaning solution formulation is the biodegradable gun clean L6 concentrate available from Ultrasonic. Designed for quick cleaning of rifles, pistols, and other guns, it quickly removes powder residue, bullet shavings, grease, and other contaminants. Offered in a 1-gallon container, the GunClean C7 dilutes 1:10 with water making it a very economical cleaning solution.

At the end of the cleaning, the cycle washes and removes the parts in freshwater. Transfer the portion to a tray containing GunLube L5 lubricating solution ready to use the mixture for a 10-12 minute cycle that removes all traces of water and the gun looks and feels brand new. Wipe off excess grease from weapon parts before reassembling.

Also Read: How to choose a right Gun Cleaning Kit

Examples of Ultrasonic Gun Cleaning Systems

Ultrasonic gun cleaners are available in many sizes and features. Here are two examples of ultrasonic available.

Cleaning Hand Guns

To clean pistol components, we suggest a size HCS-200 ultrasonic gun cleaning kit for two full-size semi-automatic handguns or a 6-inch revolver.

Designed and manufactured in the USA for law enforcement personnel, recreational shooters, hobbyists, collectors, or athletes, it cleans 16 times better than hand cleaning and eliminates the need for multiple cleaning products.
This kit includes your ultrasonic gun cleaner, basket, cover, and a separate grease pan. Also sent two 8 ounces. Containers of gun Cleaner Concentrate and gallons of ready-to-use lubricant solution.

Cleaning Rifles and Other Long Guns

The 36-inch LE-36 Ultrasonic Weapon Cleaning System is a great choice for cleaning rifles, long guns, or multiple pistols in a single cycle, which is also made in the USA.

Featuring sweep mode to provide uniform cleaning action throughout the bath, the system includes a timer, heater, drain, cover, full and half size weapon baskets with adjustable compartments, full and half size lubricating pan, 4-gallon cleaning solution concentrate. And 8 gallons of ready-to-use lubrication solution.

Leave a Reply

Your email address will not be published. Required fields are marked *